Aluminum alloy die-casting.die coat for pressure die casting

　　ADC12 aluminum alloy is a commonly used grade for aluminum alloy die-casting parts and is widely used for customization of various aluminum alloy die-casting parts, especially automotive parts, consumer electronics products, radiators, covers, brackets, etc. So, what are the characteristics of ADC12 being widely used in various fields?

　　1. Analysis of ADC12 aluminum alloy material content

　　ADC12 aluminum alloy is composed of aluminum (Al), copper (Cu) 1.5-3.5, silicon (Si) 9.6-12.0, magnesium (Mg) ≤ 0.3, zinc (Zn) ≤ 1.0, iron (Fe) ≤ 1.3, manganese (Mn) ≤ 0.5, nickel (Ni) ≤ 0.5, tin (Sn) ≤ 0.2, calcium (Ca) ≤ 200ppm, lead (Pb) ≤ 0.1, cadmium (Cd) ≤ 0.005, all of which are metal elements. Among them, we can see that ADC12 contains more silicon, copper, and aluminum materials, so it is also known as AI-SI-CU alloy. Therefore, in aluminum alloy compression, There are still many limitations in the surface treatment of castings.

　　2. Good die-casting performance

　　ADC12, due to its good formability in die casting, is suitable for making thin castings

　　3. Poor thermal conductivity

　　ADC12 aluminum alloy has poor thermal conductivity (about 96W/m.K). Currently, AA1070 aluminum is widely used as a die-casting material in China, with a thermal conductivity of around 200W/m.K and good heat dissipation effect. Therefore, it is widely used in the manufacturing of various radiator shells.

Read recommendations:

f shaped aluminum extrusion

Bicycle Derailleur Bracket

extruded aluminum heat transfer plates

cast aluminum electrical junction boxes.Zinc alloy die casting processing to consider these can be done

Advantages of Die Cast Magnesium Alloy